Shenzhen Yanhua Faith Technology Co., Ltd.
Best Diaphragm Pump Provider!
Add to Cart
150ml/m flow self-priming mini 6v diaphragm water pump
Product Description
| Model | SS524-1503-2500 |
| Size(mm) | 125.5*58*36.2 |
| Voltage(DC/V) | 24V |
| No-load current(mA) | 170 |
| Load current(mA) | 230 |
| Pressure(Kpa) | 500-600Kpa |
| Vacuum(Kpa) | 13 |
| Self-priming height(m) | 1.5m |
| Lift(m) | 2m |
| Free Flow rate(L/M) for air | 1.4 |
| Weight(G) | 310 |
A diaphragm pump (also known as a Membrane pump) is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or teflon diaphragm and suitable valves on either side of the diaphragm (check valve, butterfly valves, flap valves, or any other form of shut-off valves) to pump a fluid.
1. DC motor with long lifetime
2. Low noise
3. Continuous operation: The pump can sustain heavy duty work for a day;
4. Compact design, It has good waterproof;
5. Low power consumption, high efficient-save on operating cost;
6. Small and Light-weight, Installation is very simple;
Working principle:The rotary motion of the motor makes the driving gear to rotate and the driving gear makes the driven gear to rotate.When the meshing teeth gradually separate on one side of the suction chamber; suction chamber volume is increased; pressure is reduced, the liquid in suction pipe will be sucked into pump. Sucked liquid was divided into two road in gear teeth groove and was pushed to the discharge chamber. After liquid entering into the discharge chamber, because of the two gear tooth meshing unceasingly, the liquid from the discharge chamber into the discharge pipe by extrusion.
Application
Our products can meet the specific needs of different clients. The products are mainly used in medical cosmetology, household electronic appliances, food and beverage, health,instrument,chemical instrumentation. The car and laboratory and other industries. The products are mainly exported to korea, Japan,southeast Asia, Australia, Europe and other countries.
We have obtained the ISO9001 certification, and our products comply with the EU RoHS Directive and REACH regulations, FDA certification. Some of our products have WARS, NSF approval.
Today, Yanhua have 12 production lines and 300 skilled workers, our monthly producton capacity is 500,000pcs brushless and brush dc pumps,100,000 piston pumps and 10,000 gear pump and water pump.
User Instructions
1. Will not guarantee the products if the application of our products are exceeded the limitation which is specified on this specification.
2. In case of changes of the specification specified on this document. A written notice is requested in advance.
3. There is any data or related documentation different from this data sheet.This data sheet is the principle reference.
4. Please do not use it in the environment of corrosive gas or liquid or any detrimental gas.
5. While the motor is in operation,please do not lock the motor intentionally for a long periods,since the continuous stoppage will result in overheat and thus burnt out the motor.